Reference

    Definitions & Methodology

    Every metric, KPI, chart, and term used across TrueVal match reports and brand analytics dashboards — in one place. Use the index to jump to a section.

    Section

    Match Report — Overview KPIs

    The four headline stats and the Blended Valuation card shown at the top of every match report.

    Total Streaks

    Overview · Key Stats

    Total count of continuous on-screen appearance spans for the brand across all parts of the match. Single-frame detections are excluded — only sustained appearances (≥ 1 second) count.

    Media Equivalency Value (MEV)

    Overview · Key Stats

    Σ (Impact Seconds ÷ 10) × Effective 10-sec TV Rate

    The equivalent paid-media cost a brand would have spent to buy the same on-screen exposure at the match's ad-spot rate. Equivalently: Impact Seconds × Effective TV Rate per Second. Boosted to reflect highlight/replay weighting where applicable.

    Blended Media Value

    Overview · Key Stats (digital-CPM mode only)

    TV Value + Digital Value

    Linear TV media value combined with the digital impressions layer. Shown instead of plain MEV when digital-CPM mode is enabled for any part. See Blended Valuation card for full formula.

    Brand Impact Seconds

    Overview · Key Stats

    Σ (streak duration × avg screen share × clarity)

    Quality-adjusted full-screen-equivalent exposure time: screen-share-weighted seconds further adjusted for visibility quality (clarity, sharpness, contrast). A 10-second appearance at 25% screen share with average clarity contributes roughly 2.5 Impact Seconds. Viewers are NOT part of this formula — it is a content-side metric.

    Share of Voice (SOV)

    Overview · Key Stats

    Σ (sov_ratio × content_duration) ÷ Σ content_duration

    Content-duration-weighted average of the percentage of content time the brand was detected on screen.

    Blended Valuation card — TV / Digital / Impressions

    Overview (digital-CPM mode only)

    TV Value = (Impact Seconds ÷ 10) × Effective 10-sec TV Rate • Digital Layer Value = (Live Concurrent Viewers × Duration × Screen Share ÷ Ad Reference Duration ÷ 1000) × Effective CPM • Blended Value = TV Value + Digital Layer Value

    Blended Media Value combines linear TV-equivalent value with a digital CPM-based value layer. Digital impressions are ad-equivalent — derived from live concurrent viewers at the time of each streak, weighted by duration and screen share, then divided by the selected ad reference duration. Live Concurrent Viewers and Impact Views are distinct: viewers are the audience present, Impact Views are the audience-weighted viewer-seconds that result. A note appears if digital data is unavailable for one or more parts.

    Section

    Match Report — Part Executive Summary

    Per-part KPI grid (Pre Match / 1st Innings / 2nd Innings / Post Match) inside the Deep Dive.

    TV Media Value (Boosted) / Blended Media Value

    Deep Dive · Executive Summary

    The headline value card for the part. Label switches based on the active valuation mode (legacy MEV, TV-boosted, or blended TV + digital).

    Effective 10-second TV Rate

    Deep Dive · Executive Summary

    base 10-sec media rate × match multiplier

    The per-10-second ad-spot rate actually used to monetize this part, after applying any fixture-level match multiplier (e.g. final, knockout, marquee fixture). Divide by 10 to get the per-second rate used in MEV calculations.

    Media Rate

    Deep Dive · Executive Summary (legacy mode)

    Base /10-second ad-spot rate for the match, before any multipliers. Sourced from the published TV rate card for the fixture.

    Digital Layer

    Deep Dive · Executive Summary (digital-CPM mode)

    Digital Layer Value = (Live Concurrent Viewers × Duration × Screen Share ÷ Ad Reference Duration) × Effective CPM ÷ 1000

    Digital Layer Value starts from live concurrent viewers at the time of each streak, weights them by duration and screen share, divides by the selected ad reference duration to get ad-equivalent digital impressions, and applies the effective digital CPM. Live Concurrent Viewers ≠ Impact Views: the former is a viewer count, the latter is the audience-weighted viewer-seconds derived from it. Shown as “—” when live-viewer data is unavailable.

    In-Content Visibility

    Deep Dive · Executive Summary

    Total seconds the brand was visible during actual content (excludes break periods and ad breaks). Raw on-screen seconds, no quality weighting.

    Content Duration

    Deep Dive · Executive Summary (subtitle)

    Total seconds of analysed content for the part, excluding break/ad periods.

    Avg Screen Share

    Deep Dive · Executive Summary

    Average fraction of frame area occupied by the brand logo across all frames where it was visible.

    Highlight Visibility

    Deep Dive · Executive Summary

    Visible seconds during highlight/replay segments specifically — useful for sponsorships paying a premium for replay exposure.

    Streaks (per part)

    Deep Dive · Executive Summary

    Number of continuous on-screen appearances of the brand within this part only.

    Quality Score

    Deep Dive · Cross-Part table & per-span

    A 0–100 composite reflecting how prominently and clearly the brand appeared. Factors in clarity (sharpness/contrast), size (screen share), position (centrality), and persistence (sustained presence).

    Section

    Match Report — Cross-Part Summary

    The aggregated rollup shown when more than one part is ready.

    Total Media Equivalency / Blended Value

    Cross-Part · Aggregate

    Sum of media value across all ready parts. Switches to “Blended” when digital-CPM mode is active.

    Total Impact Seconds

    Cross-Part · Aggregate

    Sum of Brand Impact Seconds across all ready parts.

    Total Streaks

    Cross-Part · Aggregate

    Sum of streak counts across all ready parts.

    Total Impact Views

    Cross-Part · Aggregate

    Σ (duration × live concurrent viewers × avg screen share)

    Screen-share-weighted viewer-seconds delivered by the brand. Built from live concurrent viewers at the time of each streak, weighted by duration and screen share. Live Concurrent Viewers is a viewer count; Impact Views is the resulting viewer-seconds — they are different metrics. Reflects audience exposure over time, not unique reach.

    Section

    Match Report — Timelines & Distributions

    The visual analytics shown on each part's Deep Dive tab.

    Exposure Value Timeline

    Media value generated by the brand bucketed into 30-second windows across the part. Highlights when value spiked vs flattened.

    Score Timeline

    Per-frame quality score over time, with streak windows shaded. Shows the rhythm of high-quality vs incidental appearances.

    Position Heatmap

    Density of detected bounding-box centres across the frame — reveals whether the brand was concentrated in particular zones (e.g. boundary perimeter, sightscreen, stumps).

    Screen Share Distribution

    Histogram of per-frame screen-share ratios — shows whether visibility was mostly small/incidental or large/dominant.

    Streak Duration Distribution

    Histogram of streak lengths — shows whether exposure came from many short flashes or fewer sustained appearances.

    Viewership Chart

    Match-level viewership timeline derived from published audience samples for the broadcast.

    Active Audience / Server Audience Chart

    Modelled active live human viewers over time. Uses server-computed data when available; falls back to a client-side leaky-bucket model otherwise.

    Section

    Match Report — Streak Analysis (Span Table)

    The detailed per-streak table at the bottom of each part's Deep Dive.

    Streak

    A continuous detected appearance span, allowing small frame gaps based on analysis FPS (gap tolerance). Defines a single on-screen presence event.

    Counted Streak

    A streak that meets the minimum continuity threshold, currently ≥ 1 second. Single-frame and sub-second detections are excluded so incidental flashes don't inflate counts.

    Start / Peak / End frames

    Sampled frames from the streak: first detection, peak quality moment, and last detection. Click to inspect at full resolution.

    Duration (sec)

    Length of the streak in seconds (end time − start time).

    Live Viewers (at span)

    Modelled active human concurrent viewer count at the midpoint of the streak. This is the source audience count — distinct from Impact Views, which is the viewer-seconds derived from it.

    Impact Views (per span)

    duration × live concurrent viewers × avg screen share

    Screen-share-weighted viewer-seconds delivered by this single streak. Derived from the live concurrent viewer count at the streak time. Live Concurrent Viewers ≠ Impact Views — viewers are the audience present, Impact Views are the resulting viewer-seconds.

    TV Value / Digital Layer / Blended (per span)

    Per-streak monetary value. TV: (boosted impact seconds ÷ 10) × Effective 10-sec TV Rate. Digital: (live concurrent viewers × duration × screen share ÷ ad reference duration) × Effective CPM ÷ 1000. Blended: TV + Digital.

    Other Brands count

    Number of other sponsor logos that co-occurred in the same frames during this streak. Higher = more cluttered frame, less exclusive exposure.

    Tags

    Surface/asset tags applied to the streak — e.g. jersey, perimeter, LED, helmet, bat, stumps, sightscreen, ground, pitch. Used for filtering and tag-level analytics.

    Section

    Match Report — Brand Highlight Moments

    Curated bonus exposure block. Shown on the Overview, Cross-Part view, and per-part Deep Dive when one or more brand moments exist for the match.

    Brand Moment

    An editorially-curated bonus exposure marker — e.g. a celebration shot, a hoarding hero moment, or a contextual on-air mention — that detection alone wouldn't fully capture.

    Bonus Impact Seconds

    moment duration × multiplier

    Additional impact seconds layered on top of detection-based metrics for the moment's significance. Curation excludes time already captured by detection in the same window to avoid double-counting.

    Bonus Media Value

    (bonus seconds ÷ 10) × Effective 10-sec TV Rate

    Monetary value of the curated bonus exposure, added on top of the detection-based MEV. Same rate convention as the main MEV calculation. Curation excludes seconds already monetised by detection in the same window.

    Section

    Methodology Reference

    The short definitions accordion shown at the bottom of every Deep Dive.

    In-Content Visible Seconds

    Total seconds the brand was visible during content (excludes break periods). Raw on-screen seconds, no quality weighting.

    SOV Ratio (Share of Voice)

    Percentage of content time where the brand was detected on screen.

    Quality Score

    A 0–100 composite score reflecting how prominently and clearly the brand appeared (accounts for size, position, duration, and visual clarity).

    Media Equivalency Value (MEV)

    Calculated as Σ (Impact Seconds ÷ 10) × Effective 10-sec TV Rate. Represents the equivalent paid-media cost to buy the same on-screen exposure at the match's ad-spot rate.

    Streak

    A continuous detected appearance span, allowing small frame gaps based on analysis FPS.

    Counted Streak

    A streak meeting the minimum continuity threshold, currently ≥ 1 second. Single-frame and sub-second flashes are excluded.

    Section

    Client Analytics — Hero KPIs

    The three large headline cards at the top of the Analytics page.

    Total Impact Seconds

    Analytics · Hero

    Σ (duration × screen share × clarity) across every streak in every match

    Quality-adjusted full-screen-equivalent exposure time, summed across the portfolio. Viewers are NOT part of this formula — it is a content-side metric.

    Media Value Derived

    Analytics · Hero

    Σ boosted MEV across all matches

    What an equivalent paid-media spend would have cost to buy the same exposure across every match analysed. Uses Blended Value when digital-CPM mode is active, MEV otherwise.

    Total Impact Views

    Analytics · Hero

    Σ (duration × live concurrent viewers × avg screen share)

    Screen-share-weighted viewer-seconds delivered by the brand across the portfolio. Live concurrent viewers at each streak are weighted by duration and screen share, then summed. Live Concurrent Viewers (a viewer count) and Impact Views (the resulting viewer-seconds) are distinct metrics. Reflects audience exposure over time, not unique reach.

    5-sec Equivalent Impressions

    Analytics · Hero (subtitle, previously labelled Equivalent Reach)

    Total Impact Views ÷ 5

    Total Impact Views divided by 5 seconds. Estimates how many 5-second ad-equivalent impressions would be required to match the delivered exposure. Not unique reach.

    Section

    Client Analytics — Supporting Metrics

    The six smaller cards beneath the hero KPIs.

    Avg Quality

    Average per-match Quality Score across the portfolio. Higher = more memorable, prominent exposure.

    Avg Share of Voice

    Average percentage of content time the brand was detected on screen, across analysed matches (match-average SOV).

    Portfolio SOV (weighted)

    Σ visible content seconds ÷ Σ content duration

    Content-duration-weighted SOV across the whole portfolio. Use this instead of the simple match-average when one fixture is much longer or larger than another.

    Visibility Duration

    Raw on-screen seconds across all detected streaks, with no quality weighting. Compare against Total Impact Seconds to gauge how much of the time was high-quality.

    Total Streaks (portfolio)

    Number of continuous on-screen appearances (counted streaks) of the brand logo across every analysed match. Gap tolerance for splitting a streak is set by analysis FPS — not a fixed 1-second window.

    Avg Co-Brands per Streak

    Average number of other sponsor logos sharing the screen with this brand during a streak. Lower = more exclusive exposure; higher = more cluttered frames.

    Avg Screen Share (portfolio)

    Average fraction of frame area occupied by the brand logo while it was on screen, across all matches. Larger share = more dominant presence.

    Section

    Client Analytics — Charts, Splits & Heatmap

    Match-by-Match Trend (Actual vs Indexed)

    Compare any two metrics side-by-side across matches. Actual: shows raw values. Indexed: 100 = the season median for that metric, so spikes/dips are normalised against typical performance.

    Peak Concurrent Viewers

    Highest single-moment live audience size observed during the match (not summed over time).

    Avg Live Viewers (In-Game)

    Average active live human audience during in-game play (excludes pre/post show), useful for normalising visibility across fixtures of different audience sizes.

    Play-Phase Split

    Breakdown of brand visibility into Batting (your team batting), Bowling (your team bowling), and Pre/Post (non-play windows). Reveals which phase delivers most value.

    Tag Breakdown

    Split of value, visible seconds, or impact views by surface/asset tag (jersey, perimeter, LED, helmet, etc.) so you can see which surfaces are doing the work.

    Visibility Heatmap

    Position heatmap aggregated across every match — shows the brand's typical zones on the broadcast frame at portfolio scale.

    Efficiency

    Value generated per Impact View and per Impact Second. Lets you compare ROI of exposure across fixtures of very different audience sizes.

    Section

    Client Analytics — Derived Lenses

    Cross-metric ratio lenses that surface insights detection-level metrics alone don't reveal.

    Value Per Impact View

    Lens · monetization-efficiency

    Selected Media Value ÷ Impact Viewer-Seconds

    Monetary value per viewer-second delivered. Selected Media Value = Blended Value when digital-CPM mode is active, MEV otherwise. Highlights matches where each viewer-second was unusually expensive or cheap.

    Visibility Conversion

    Lens · visibility-quality-conversion

    Impact Seconds ÷ Visibility Duration

    How efficiently raw on-screen time converted into quality-weighted impact. High = sharp, dominant frames; low = mostly small/peripheral exposure.

    Audience Capture

    Lens

    Impact Views ÷ Avg Live Concurrent Viewers

    Viewer-seconds delivered per average concurrent viewer available. Numerator is Impact Views (audience-weighted viewer-seconds); denominator is Avg Live Concurrent Viewers (a viewer count) — they are intentionally different metrics. A normalised exposure-per-viewer measure.

    Clean SOV Index

    Lens (previously labelled SOV Efficiency)

    SOV ÷ Avg Co-Brands per Streak

    Clutter-adjusted SOV. High = dominant in clean frames; low = SOV propped up by cluttered moments. Note: this is NOT monetary efficiency — it's a visibility-quality lens.

    Audience Utilization

    Lens

    Impact Views ÷ Peak Concurrent Viewers

    Match opportunity lens: how much of the peak concurrent audience moment was actually converted into screen-share-weighted exposure (Impact Views). Peak Concurrent Viewers is a viewer count; Impact Views is viewer-seconds — distinct metrics. Low values flag matches where the brand under-indexed against an unusually large peak audience.

    Exposure Depth

    Lens

    Impact Seconds ÷ Total Streaks

    Average impact contributed by each streak. High = a few deep, sustained appearances; low = many shallow flashes.

    Section

    Delivery Stability

    Consistency analysis of brand delivery across matches.

    Delivery Stability Score

    0.6 × Impact Seconds consistency + 0.4 × SOV consistency

    A 0–100 score reflecting how consistently the brand delivered value across the analysed matches. Higher = more predictable, planning-friendly delivery.

    Stability Bands

    Stable (≥ 80) — replicable value regardless of fixture. Healthy variation (60–79) — normal match-to-match swing. Volatile (45–59) — fixture draw matters meaningfully. Highly volatile (< 45) — a few blockbuster matches drive most of the worth.

    Median / MAD / Robust CV

    Underlying robust statistics. Median: typical match value. MAD: median absolute deviation from the median (robust spread). Robust CV: MAD ÷ Median, the dispersion ratio that drives the consistency score.

    Section

    Modes & System Terms

    Digital-CPM Mode

    Per-part valuation mode. Legacy: TV media value only. TV-boosted: TV media value with a fixture multiplier but no digital layer. Blended: TV media value + digital impressions × CPM.

    Match Multiplier

    Fixture-level multiplier applied to the base TV/CPM rate (e.g. higher for finals, knockouts, marquee fixtures). Reflects the premium the market pays for those slots.

    Part

    A match is split into four parts: Pre Match Show, First Innings, Second Innings, Post Match Show. Each is analysed independently and rolled up in the Cross-Part summary.